Birthing Seat
Body: fibreglass with hospital-grade isophalic gelcoat
Handles: stainless steel
Dimensions: 350 mm high at front, 370 mm high at rear, 450 mm wide, 550 mm deep
Weight: approx 5 kg
Backrest Support
Body: fibreglass with hospital-grade isophalic gelcoat
Padding: self-skinning polyurethane
Locking tongue: hard, high-tensile polyurethane
Dimensions: 1060 mm high, 430 mm wide at body, 740 mm wide at base, 820 mm wide (including arms), 520 mm deep at base
Weight: approx 10 kg
Midwife Seat
Body: fibreglass with hospital-grade isophalic gelcoat
Legs: stainless steel
Dimensions: 660 mm high, 330 mm high at top of seat area, 350 mm wide, 500 mm deep
Weight: approx 5 kg
Equipment Table
Body: fibreglass with hospital-grade isophalic gelcoat
Legs: stainless steel
Dimensions: 330 mm high, 390 mm wide, 190 mm deep
Weight: approx 5 kg
Tri-Positional Mirror
Body: self-skinning polyurethane
Insert: reflective glass panel with polished rim and shatterproofing tape on reverse
Dimensions (glass): 160 mm diameter, 4 mm thick
Dimensions (overall): 200 mm diameter, 140 mm deep
Weight: 700 gm
Contoured Floor Mat
Core: PEVA 75 closed-cell foam with memory
Casing: sanitized marine vinyl
Dimensions (Large): 2100 mm x 1900 mm x 12 mm
Dimensions (Small): 1640 mm x 1000 mm x 12 mm
Weight (Large): 7 kg
Weight (Small): 3 kg
Note: Large Floor Mat can be folded in half.
Kneeling Pad
Core: PEVA 75 closed-cell foam with memory
Casing: sanitized marine vinyl
Dimensions: 410 mm x 210 mm x 12 mm
Weight: 300 gm
Padded Pouch for Birthing Seat
(Available as an optional extra — not supplied as part of Floor Studio)
Inner lining: thermofleece
Outer covering: waterproof canvas
Weight: approx 1 kg
Note: Velcro tape fastening for ease of use.
